Broadcast status & studio lighting

HRNL-25W PoE on-air lamp module

Make every status visible.

PoE-powered RGB lighting and ON AIR cues, with browser setup and temperature monitoring.

Discuss your project View downloads
HRNL-25W module with current seven-pin LED connector and PoE/LAN connection
PoE power supply
25 WIEEE 802.3at Class 4
Connected LEDs
120 totalMaximum across all segments
Standard segments
5Up to 45 with an optional licence

The 25 W PoE supply supports a maximum of 120 connected LEDs device-wide. Extended Segments increases logical control zones; the LED total stays the same.

Two applications. One compact module.

From studio cues to rack status

Conceptual television studio with purple accent lighting around a presenter desk and monitors
Conceptual application illustration

Studio RGB & ON AIR

Add RGB accents around desks and monitors, alongside clear ON AIR cues. Configured control events select colours, transitions or effects for studios, voice-over booths, control rooms and OB facilities.

Conceptual server room with green rack indicators and red sections identifying equipment fault locations
Conceptual application illustration

Temperature & rack status

Monitor two locations with compatible 1-Wire temperature sensors. Local temperature Logic can drive configured indications. An external monitoring system supplies equipment-fault events to highlight the affected rack section.

Connect to your workflow

Control that fits your setup

Five priority Rules per active segment, ten Presets and ten shared Custom Effects help turn control events into clear visual cues.

Included

  • TSL UMD 3.1
  • Pro-Bel SW-P-08
  • OSC 1.0
  • REST API

Optional licences

  • Ember+
  • MQTT
  • Extended Segments
  • Cluster Mode

Optional Cluster Mode licence

One Active master. A coordinated system.

Link a Primary, an optional standby Backup and 1–32 read-only Followers. Send shared control and configuration changes to the current Active master.

The Active master distributes selected application configuration and live Rule state. Each device keeps its own network settings, users, licences and Cluster topology.

When the Primary is unavailable

  1. A ready Backup becomes Active.
  2. Followers use the Backup.
  3. External clients reconnect or retarget the Active master.

Read the Cluster setup guide

External control & configuration
Active masterPrimary
Selected application configuration
& live Rule state
BackupOptional standbyMirrors Primary state
Followers1–32 devicesRead-only
Backup FollowersFailover only, after a ready Backup becomes Active
Normal operation: Primary is Active. The optional Backup remains on standby until failover.

Product details

Compact hardware. Clear connections.

Current HRNL-25W LED end with locking seven-pin XLR-F connector
LED connection · Locking seven-pin XLR-F
Current HRNL-25W PoE/LAN end with RJ45 connector and corrected seven-pin legend
PoE/LAN · Power and network over Ethernet
Temperature monitoring & auxiliary inputs

Two inputs total. Configure each as GPI or temperature sensor: two GPIs, two sensors, or one of each.

Use one externally powered, compatible 1-Wire sensor per sensor-configured input. DS18B20/DS1822 data-format compatibility is documented; DS18S20 and parasite-power operation are not qualified.

Readings refresh approximately every five seconds. Delivery follows REST API polling, MQTT telemetry or Ember+ subscriptions. MQTT and Ember+ require their respective licences.

Seven-pin connector & dimensions

Connector pinout

Locking seven-pin XLR-F

Seven-pin XLR-F connector assignment
Pin Function
1 GND
2 LED Data
3 GPI1 / Temp1
4 GPI2 / Temp2
5 N/C
6 N/C
7 +5V

N/C pins have no connection.

Dimension drawings

Mounting plate: 111.2 × 66.4 mm. Drawings are not to scale; confirm dimensions before installation.

Top view Approved HRNL-25W top dimension drawing with original measurement labelsEnlarge drawing
Front view Approved HRNL-25W front dimension drawing with original measurement labelsEnlarge drawing
Rear view Approved HRNL-25W rear dimension drawing with original measurement labelsEnlarge drawing

Plan your integration

Documentation & downloads

Documentation for firmware v1.3.0 Release, build 310. All PDFs and software links open in a new tab.

Product documents

HRNL-25W datasheetRevision 1.10 · PDF
English 日本語 Español
User manualRevision 1.20 · PDF
English 日本語 Español

Protocol & Cluster guides

English PDFs. Ember+, MQTT and Cluster Mode require their respective licences.

TSL UMD 3.1Revision 2.1 · PDFPro-Bel SW-P-08Revision 3.2 · PDFOSC 1.0Revision 2.2 · PDFREST APIRevision 8.13 · PDFEmber+Revision 1.4 · PDFMQTTRevision 1.6 · PDFCluster Mode setupUser manual · Chapter 11 · PDFCluster Mode diagramDatasheet · Page 6 · PDF

Firmware & discovery tool

The firmware package and documentation are for v1.3.0 Release, build 310.

Device firmwareVersion 1.3.0 Release · build 310 · ZIPWindows discovery toolDevice Configuration App · ZIP